Filter Systems

agct_1000_img

AGCT-1000 SAFE DRINKING WATER COUNTERTOP SYSTEM

AquaGuidance AGCT-1000 safe drinking water countertop system is the popular choice for people who want ease of install and easy access to their drinking water filter. It is an ideal solution for people that rent and cannot install permanent fixtures to the current plumbing or for college students, business people, or our service men & women that move frequently.

The AGCT-1000 attaches to the existing sink faucet and with a simple push of the diverter valve clean, safe, great tasting drinking water is delivered to the system for your enjoyment. In the original position the valve allows unfiltered water to run directly into the sink to rinse dishes, etc.

 

FEATURES & BENEFITS MODEL: AGCT-1000

  • Highest Certified Capacity Combined Lead, Mercury, Chloramine, Chlorine, Taste and Odor reduction filter on the market.*

    – 1750 Gallons Capacity for Lead, Mercury, Chloramine, and Chlorine reduction performance.

    – Over 4.75 gallons every day for a year!

  • Installs in less than 10 mins.
  • No need to disrupt plumbing under the sink.
  • No separate hole to drill in countertop.
  • All hardware included for typical installation.
  • Based on cost per gallon it is a fraction of the cost of bottled water.
  • Replaces up to 14,000 16 oz bottles!
  • Makes great tasting coffee, tea, and other cold drinks.
  • Provides high quality water for infant/baby formula and for women during pregnancy.
  • Perfect for pets
  • Made in USA

This system has been tested according to NSF/ANSI 53 & 42 for the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentrationless than or equal to the permissable limit for water leaving the system as specified by NSF/ANSI 53 & 42.

Substance Influent Challenge Concentration mg/L Maximum permissible product water concentration mg/L Calculated Minimum permissible concentration in % removal3 AGCT-1000 % removal throughout lifetime of the cartridge
Chloramine taste & odor1 3.0 +/- 10% 0.5 83.30% >99%
Chlorine taste & odor2 2.0 +/- 10% > or = 50% 50% >99%
Lead pH 6.5 0.15 +/- 10% 0.01 93.30% >98.4%
Lead pH 8.5 0.15 +/- 10% 0.01 93.30% >98.4%
Mercury pH 6.5 0.006 +/- 10% 0.002 66.70% >90.9%
Mercury pH 8.5 0.006 +/- 10% 0.002 66.70% >90.9%
Chloramine taste & odor1
Influent Challenge Concentration mg/L 3.0 +/- 10%
Maximum permissible product water concentration mg/L 0.5
Calculated Minimum permissible concentration in % removal3 83.30%
AGCT-1000 % removal throughout lifetime of the cartridge >99%
Chlorine taste & odor2
Influent Challenge Concentration mg/L 2.0 +/- 10%
Maximum permissible product water concentration mg/L > or = 50%
Calculated Minimum permissible concentration in % removal3 50%
AGCT-1000 % removal throughout lifetime of the cartridge >99%
Lead pH 6.5
Influent Challenge Concentration mg/L 0.15 +/- 10%
Maximum permissible product water concentration mg/L 0.01
Calculated Minimum permissible concentration in % removal3 93.30%
AGCT-1000 % removal throughout lifetime of the cartridge >98.4%
Lead pH 8.5
Influent Challenge Concentration mg/L 0.15 +/- 10%
Maximum permissible product water concentration mg/L 0.01
Calculated Minimum permissible concentration in % removal3 93.30%
AGCT-1000 % removal throughout lifetime of the cartridge >98.4%
Mercury pH 6.5
Influent Challenge Concentration mg/L 0.006 +/- 10%
Maximum permissible product water concentration mg/L 0.002
Calculated Minimum permissible concentration in % removal3 66.70%
AGCT-1000 % removal throughout lifetime of the cartridge >90.9%
Mercury pH 8.5
Influent Challenge Concentration mg/L 0.006 +/- 10%
Maximum permissible product water concentration mg/L 0.002
Calculated Minimum permissible concentration in % removal3 66.70%
AGCT-1000 % removal throughout lifetime of the cartridge >90.9%

1 As monochloramine (measured as Cl2/L)
2 Chloramine testing was used as the surrogate for chlorine reduction.
3 Calculated minimum reduction is determined by using the target influent minus the max allowable concentration divided by the target influent.

Technical Specifications and Ordering Information:

PART No. Unit Dimensions Lead Mercury Capacity @ Flow4 Chloramine, Chlorine Capacity @ Flow5
AGCT- 1000 5”D x 6”W x 12”H 1750 gal. @ 0.5 GPM
6624 L @ 1.89 LPM
1750 gal @ 0.5 GPM
6624 L @ 1.89 LPM
AGCT-1000
Unit Dimensions 5”D x 6”W x 12”H
Lead Mercury Capacity @ Flow4 1750 gal. @ 0.5 GPM
6624 L @ 1.89 LPM
Chloramine, Chlorine Capacity @ Flow5 1750 gal @ 0.5 GPM
6624 L @ 1.89 LPM

4,5 Certified by IAPMO R&T (International Association of Plumbing and Mechanical Officials) to NSF/ANSI 53 for Lead and Mercury reduction and NSF/ANSI 42 for Chloramine, Chlorine, taste and odor reduction.

Model# APB-O-G-937-F
Model# APB-O-G-937-F

REPLACEMENT LEAD, MERCURY, CHLORAMINE, CHLORINE, TASTE & ODOR REDUCTION FILTER CARTRIDGE FOR THE AGCT-1000 SYSTEM

FEATURES & BENEFITS

  • Nominal 1-5 Micron Class II filter to reduce risk of premature clogging of filter.
  • Only Class II filter certified for Lead, Mercury and Chloramine reduction.
  • Minimal pressure drop for better flow with low water pressure.
  • Block filter design assures reliable performance with no risk of channeling failure.
  • No release of granular fines downstream from filter for clear, particulate-free water.
  • Made in USA

blue-arrow

LEAD
+98.4%

circle_blue

Greater than 98.4%
lead removal
throughout lifetime
of the cartridge

green-arrow

CHLORAMINE
+99%

circle_green

Greater than 99%
chloramine removal
throughout lifetime
of the cartridge

(BOTH OUT TO 1750 GALLONS)

 

TECHNICAL SPECIFICATIONS AND ORDERING INFORMATION:

PART No. OD x ID x Length Lead, MercuryCapacity @ Flow1 Chloramine, ChlorineCapacity @ Flow1 Initial PSID@ Flow
APB-0-G-937-F 2.6” x 1.25” x 9.37”(66mm x 32mmx 238mm) 1750 gal. @ 0.5 GPM
6624 L @ 1.89 LPM
1750 gal @ 0.5 GPM
6624 L @ 1.89 LPM
7 PSID @0.5 GPM
APB-0-G-937-F
OD x ID x Length 2.6” x 1.25” x 9.37”(66mm x 32mmx 238mm)
Lead, MercuryCapacity @ Flow1 1750 gal. @ 0.5 GPM
6624 L @ 1.89 LPM
Chloramine, ChlorineCapacity @ Flow1 1750 gal @ 0.5 GPM
6624 L @ 1.89 LPM
Initial PSID@ Flow 7 PSID @0.5 GPM

1Certified by IAPMO R&T (International Association of Plumbing and Mechanical Officials) to NSF/ANSI 53 for Lead and Mercury reduction and NSF/ANSI 42for Chloramine, Chlorine, Taste and Odor reduction when used in the AGCT-1000.

iapmort-shield_componentwater-systems-mark12made-in-usa

 

WARNINGS:

Operating Temperature: Range: 33 deg F to 100 deg F
Maximum Operating Pressure: 100 psig/ 8.28bar.

The AGCT-1000 unit and APB-O-G-937F AquaGuidance filter block is designed to be used only on microbiologically safe and adequately disinfected water supplies as it is not designed to kill or remove bacteria or viruses. All test data is certified but performance of the filter may be altered by the source water’s organic content, turbidity, pH, or other conditions encountered in actual use. APB-O-G-937-F is the direct factory replacement cartridge used in the AGCT-1000 CT system and should be flushed a minimum of 20 minutes prior to use.

All performance claims presented here are based on data believed to be reliable but are not to be considered a warranty of performance.

Limited Liability

Seller makes no warranties of any kind, expressed or implied, and expressly disclaims all warranties of every kind, concerning this product, including warranties of merchantability or fitness for a particular purpose, except that this product should be capable of performing as described in this product data sheet. Seller’s obligation shall be limited solely to the refund of the purchase price or replacement of the product, if proven defective, at Seller’s sole discretion. Determination of suitability of product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability.

* Comparison of ALL certified standard 10-inch residential filter cartridges.

Installation and Warranty Documents

AGCT-1000 Installation Instruction Sheet                       AGCT-1000 Spanish Installation Instruction Sheet

AGCT-1000 Warranty Document